4-3
Chapter 4: System Interface
• Power: Indicates power is being supplied to the system's power supply units.
This LED should normally be illuminated when the system is operating.
• HDD:
• NIC1:
• NIC2:
Information LED
Status Description
Continously on and red An overheat ocondition has occurred. (This may be
caused by cable congestion.)
Blinking red (1 Hz) Fan failure: check for an inoperative fan.
Blinking red (0.25 Hz) Power failure: check for an inoperative power supply.
Solid blue Local UID has been activated. Use this function to
locate the server in a rack environment.
Blinking blue (300 msec) Remote UID has been activated. Use this function to
locate the server from a remote location.
1
2
To Next Page
Loading...
