Supermicro SC825 Series - Installing the Rear 2.5 Hard Drive Cage (CSE-825 B Only)

SC825 Chassis Manual
5-8
Installing the Rear 2.5" Hard Drive Cage (CSE-825B Only)
The CSE-825B model chassis supports an optional hard drive cage for two
additional 2.5" hot-swappable hard drives. The hard drive cage installs in the rear of
the chassis next to the power supply. Once the hard drive cage has been installed,
the 2.5" hard drives may be removed without powering down the server.
Installing the 2.5" Rear Hard Drive Cage
1. 
surface and remove the chassis cover.
2. 󰀨
3. 󰀨
Figure 5-8. Installing the Rear 2.5" Hard Drive Cage
1
2
1
3
Note: 󰀨
If you want to remove the rear hard drive cage in the future, these two removable
󰀨
holes on the chassis base.