Supermicro SC825 Series - Appendix B BPN-SAS-825 TQ Backplane Specifications; B-1 ESD Safety Guidelines; B-2 General Safety Guidelines

B-1
Appendix C: BPN-SAS-825TQ Backplane Specications
Appendix B
BPN-SAS-825TQ Backplane Specications
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
B-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sucient to protect your equipment from ESD.
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing a component from the antistatic
bag.
• Handle the backplane by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the card and peripherals back into their antistatic bags when not in use.
B-2 General Safety Guidelines
• Always disconnect power cables before installing or removing any components
from the computer, including the BPN-SAS-825TQ backplane.
• Disconnect the power cable before installing or removing any cables from the
BPN-SAS-825TQ backplane.
• Make sure that the BPN-SAS-825TQ backplane is securely and properly in-
stalled on the motherboard to prevent damage to the system due to power
shortage.