Supermicro SUPERSERVER 2028TP-HC0R - Page 119

Chapter 7: BIOS
7-25
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
          
Enabled and Disabled.

Super IO Conguration
Super IO Chip AST2400

Serial Port 1 Conguration/Serial Port 2 Conguration
Serial Port 1/Serial Port 2

are Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address of

Change Port 1 Settings/Change Port 2 Settings

of Serial Port 1 or Serial Port 2. Select Auto for the BIOS to automatically assign

The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port 2 Attribute
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redi-
rection. The options are COM and SOL.

Serial Port Console Redirection
COM 1
COM 1 Console Redirection
Select Enabled to enable COM Port 1 Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The
options are Disabled and Enabled.