Supermicro SUPERSERVER 2028TP-HC0R - Ipmi

7-34
SUPERSERVER 2028TP-HC0R/HC0TR/HC0FR USER'S MANUAL
7-5 IPMI
         
settings.
BMC (BaseBoard Management Controller) Firmware Revision

IPMI Status

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging support at bootup. The options
are Enabled and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No, Yes, On next reset, and Yes, On every reset.