Chapter 5: Advanced Serverboard Setup
5-11
5-6 Adding PCI Expansion Cards
The 2028TP-HC0R/HC0TR/HC0FR includes one preinstalled riser card per node,
for each node.
Installing an Expansion Card
1. After powering down the system, remove the PCI slot shield.
2. Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shield protects the serverboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.
To Next Page
Loading...
