2-4
SUPERSERVER 2028TP-HC0R/HC0TR/HC0FR USER'S MANUAL
2-5 Installing the System into a Rack
This section provides information on installing the 2028TP-HC0R/HC0TR/HC0FR
into a rack unit with the rails provided. There are a variety of rack units on the market,
which may mean that the assembly procedure will differ slightly from the instructions
provided. You should also refer to the installation instructions that came with the
rack unit you are using. Note:
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
the left and right side of the chassis.
Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rails
(Left Rail Assembly Shown)
Inner Rail
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
Outward
Locking Tab
Middle Rail
Outer Rail
Warning: do not pick up the server with the front handles. They are
designed to pull the system from a rack only.
To Next Page
Loading...
