Supermicro SUPERSERVER 2028TP-HC0R - Page 90

6-16
SUPERSERVER 2028TP-HC0R/HC0TR/HC0FR USER'S MANUAL
Installing Expansion Cards (Figure 6-15)
1. 
surface, and open the chassis cover.
2. Pull out the serverboard node drawer from the chassis.
3. Pull open the expansion card PCI slot clip in the rear of the serverboard node
drawer.
4. Remove the PCI PCI slot shield.
5. Place the expansion card into the serverboard node drawer.
6. 
card bracket with the opening in the rear of the serverboard node drawer.
7. Close the expansion card PCI slot clip.
8. Close the cover, reconnect the power supply and power-up the chassis.
Figure 6-15. Installing the Expansion Card
Riser Card
Riser Card
Bracket
Expander Card