Supermicro SuperServer 5019C-MHN2 - Page 86

SuperServer 5019C-MHN2 User's Manual
86
PCH-FW Conguration
ME Firmware Version: 12.0.3.1091
ME Firmware Mode: Normal Mode
ME Firmware SKU: Corporate SKU
ME FW Image Re-Flash
Disabled and
Enabled.
Manageability Features State
            
Enabled.
AMT BIOS Features
Disable this feature to deny access to the MEBx setup. The options are Disabled and Enabled.
*If the feature "AMT BIOS Features" is set to Enabled, the AMT Conguration submenu
will be available for conguration:
AMT Conguration
ASF support
Use this feature to enable or disable Alert Standard Format support. This feature sends an
alert about a potential issue when the operating system is in a sleep state. The options are
Disabled and Enabled.
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and Enabled.

CIRCA Conguration
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the
CIRCA boot. The options are Disabled and Enabled.
*If the feature "Activate Remote Assistance Process" above is set to Enabled, the
feature below will be available for conguration:
CIRCA Timeout
Use this feature to set the timeout value for MPS connection. Use 0 for the default timeout
value of 60 seconds.