Supermicro SuperServer 5019C-MHN2 - Page 87

Chapter 6: BIOS
87

ASF Conguration
PET Progress
Use this feature to enable or disable PET Events Progress to receive PET Events alerts.
The options are Disabled and Enabled.
WatchDog
Select Enabled to allow AMT to reset or power down the system if the operating system
or BIOS hangs or crashes. The options are Disabled and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog (above) is enabled. This is a timed delay in seconds,
before a system power down or reset after a BIOS or operating system failure is detected.
Enter the value in seconds.
ASF Sensors Table
Enable this feature for the ASF Sensor Table to be added into the ASF! ACPI table. The
options are Disabled and Enabled.

Secure Erase Conguration
Secure Erase mode
Select Real to securely erase a solid state drive. The options are Simulated and Real.
Force Secure Erase
Select Enabled to force a secure erase of the solid state drive on the next boot. The options
are Disabled and Enabled.

OEM Flags Settings
MEBx hotkey Pressed
Use this feature to specify whether the MEBx hotkey should be enabled during the system
boot. The options are Disabled and Enabled.
MEBx Selection Screen
Use this feature to select the type of MEBx selection screen. Press 1 to enter the ME
            
activated for a remote connection. The options are Disabled and Enabled.
Hide Uncongure ME Conrmation Prompt
Disabled
and Enabled.