Supermicro SuperServer 5019C-MHN2 - Page 92

SuperServer 5019C-MHN2 User's Manual
92
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
HTTP BOOT Conguration
HTTP BOOT Conguration
Http Boot One Time
Use this feature to create the HTTP boot option. The options are Disabled and Enable.
Input the desrciption
Highlight the feature and press enter to create a description.
Boot URI
Highlight the feature and press enter to create a boot URI.

Trusted Computing
*The features in the Trusted Computing section on this page are displayed if a TPM
1.2 module is detected:
Conguration
Security Device Support
            
security devices will be enabled for TPM support to enhance data integrity and network
  󰀨
are Disable and Enable.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data
              󰀨 
options are Disabled and Enabled.
Pending Operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.