Chapter 6: BIOS
93
Note: Your system will reboot to carry out a pending TPM operation.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
Current Status Information
This feature displays the status of the TPM support on this motherboard.
• TPM Enabled Status
• TPM Active Status
• TPM Owner Status
SMCI BIOS-Based TPM Provision Support (not available on the -F SKU)
Use feature to enable the Supermicro TPM Provision support. The options are Disabled and
Enabled.
TXT Support
Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and
this feature to enable or disable TXT Support. The options are Disabled and Enabled.
*The features in the Trusted Computing section on this page and the next are
displayed if a TPM 2.0 module is detected:
TPM20 Device Found
Firmware Version: 5.51
Vendor: IFX
Security Device Support
security devices will be enabled for TPM support to enhance data integrity and network
are Disabled and Enabled.
The following TPM information will be displayed:
• Active PCR banks
• Available PCR banks
To Next Page
Loading...
