Supermicro SuperServer 7089P-TR4T - Page 105

Chapter 6: BIOS
105
Onboard Video OPROM (Option ROM)/SIOM Module OPROM/NVMe Module OPROM/
GPU OPROM/HDD OPROM
Use this feature to congure the Option ROM type for the device installed in the slot specied
by the user for system boot. The options are Disabled, Legacy and EFI.
PCIE Module Slot1 x16 OPROM (Option ROM)/PCIE Module Slot2 x16 OPROM/PCIE
Module Slot3 x16 OPROM/PCIE Module Slot4 x16 OPROM/ PCIE Module Slot5 x16
OPROM
Use this feature to congure the Option ROM type for the device installed in the slot specied
by the user for system boot. The options are Disabled, Legacy and EFI.
NetworkStackConguration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unied Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. If this feature is disabled, it will not create
the Ipv4 PXE boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. If this feature is disabled, it will not create
the Ipv4 HTTP boot option. The options are Enabled and Disabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. If this feature is disabled, it will not create
the Ipv6 PXE boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. If this feature is disabled, it will not create
the Ipv6 HTTP boot option. The options are Enabled and Disabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the <ESC> key to abort the PXE boot. The
default is 0.
Media Detect Time
Use this feature to select the wait time in seconds for the BIOS ROM to detect the LAN media
(Internet connection or LAN port). The default is 1.