13
Chapter 1: Introduction
Rear Chassis Features
Item Feature Description
1-5 PCI-E Modules Hot-plug* PCI-E modules 1 through 5 (#1 = PCIE module 1, etc.)
6-13 Hot-swap Fans 9-cm counter-rotating fans (#6 = FAN1, etc.)
14 PCH Module
PCH module for system PCH chip, IPMI port, SATA-DOM, M.2, TPM, RAID
key. Also includes a SIOM from CPU3 (default 4x 10G RJ45 LAN ports)
15-19 Power Supplies 5x Titanium Level 1600W power supplies (#15 = PS1, etc.)
20 Attention Button Used to remove or apply power to the PCIE module
21 PCI-E Power LED Green LED indicating power is present on the PCI-E module.
22 Attention LED Amber LED indicating an operational problem on the PCI-E module.
23 I/O Ports VGA, COM and two USB ports in KVM port
*Must be supported by the OS.
Note: the numbers embedded in Figure 1-3 refer to the logical number of the individual
modules (e.g. Fan7, Power Supply1, etc.).
Figure 1-4. Chassis Rear View
Rear Features
The illustration below shows the features included on the rear of the chassis.
20 21 22
5 1
2
3
4
9
8
7
6
1817
16
10
13
12
15
11
19
From CPU8
From CPU7
From CPU6
From CPU5
From CPU4
23
14
To Next Page
Loading...
