Supermicro SuperServer 7089P-TR4T - Attaching the Intel Intel 81 Xx Series Processor to the Narrow Processor Clip to Create the Processor Package Assembly

SuperServer 7089P-TR4T User's Manual
46
Attaching the Intel Intel® 81xx series Processor to the Narrow
Processor Clip to Create the Processor Package Assembly
1. Locate pin 1 (notch A), which is the triangle located on the top of the narrow processor
clip. Also locate notch B and notch C on the processor clip.
2. Locate pin 1 (notch A), which is the triangle on the substrate of the CPU. Also, locate
notch B and notch C on the CPU as shown below.
3. Align pin 1 (the triangle on the substrate) of the CPU with pin 1 (the triangle) of the
narrow processor clip. Once they are aligned, carefully insert the CPU into the processor
clip by sliding notch B of the CPU into notch B of the processor clip, and sliding notch C
of the CPU into notch C of the processor clip.
4. Examine all corners of the CPU to ensure that it is properly seated on the processor
clip. Once the CPU is securely attached to the processor clip, the processor package
assembly is created. (Note: Please exercise extreme caution when handling the CPU.
Do not touch the CPU LGA-lands to avoid damaging the LGA-lands or the CPU. Be
sure to wear ESD gloves when handling components.)
Processor Package Carrier (w/CPU mounted on the Processor Clip)
A
B
C
Allow Notch C to
latch on to CPU
Allow Notch B to
latch on to CPU
A
A
B
B
C
C
Pin 1
Align CPU Pin 1
CPU (Upside Down)
w/CPU LGA Lands up
CPU/Heatsink Package
(Upside Down)
Align Notch C of the CPU
and Notch C of the Processor Clip
Align Notch B of the CPU
and Notch B of the Processor Clip