Supermicro SuperServer 7089P-TR4T - Ipmi

Chapter 6: BIOS
117
When you select this submenu and press the <Enter> key, the following information will
display:
• IPMI Firmware Revision: This feature indicates the IPMI rmware revision used in your
system.
• Status of BMC: This feature indicates the status of the BMC (Baseboard Management
Controller) installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Enabled and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.
6-5 IPMI
Use this feature to congure Intelligent Platform Management Interface (IPMI) settings.