Supermicro SuperServer 7089P-TR4T - Page 119

Chapter 6: BIOS
119
UpdateIPMILANConguration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The default setting is No. If this option is set to Yes, the following items will display.
IPMILANSelection(AvailablewhenUpdateIPMILANCongurationissettoYes)
Use this feature to congure the IPMI LAN mode setting. The options are Dedicated, Shared,
and Failover.
VLANSupport(AvailablewhenUpdateIPMILANCongurationissettoYes)
Select Enabled for IPMI VLAN support. The options are Disabled and Enabled.
CongurationAddressSource(AvailablewhenUpdateIPMILANCongurationis
settoYes)
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
eld. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Conguration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are DHCP and Static.