Supermicro SuperServer 7089P-TR4T - Page 152

SuperServer 7089P-TR4T User's Manual
152
CD/DVD ROM/RW device can be used for this purpose. However, a USB Hard Disk drive
cannot be used for BIOS recovery at this time.
The le system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32)
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM le if the media size becomes too
large due to the huge volumes of folders and les stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a di󰀨erent machine, copy the "Super.ROM" binary image le into the Root "\"
directory of a USB device or a writable CD/DVD.
Notes: 1. If you cannot locate the "Super.ROM" le in your drive disk, visit our website
at www.supermicro.com to download the BIOS package. Extract the BIOS binary image
into a USB ash device and rename it "Super.ROM" for the BIOS recovery use. 2. Before
recovering the main BIOS image, conrm that the "Super.ROM" binary image le you
download is the same version or a close version meant for your motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.