EasyManua.ls Logo

Supermicro SuperServer E200-9A - Chipset Configuration; North Bridge Configuration

Supermicro SuperServer E200-9A
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
SuperServer E200-9A User's Manual
AES-NI
Select Enable to use the Intel Advanced Encryption Standard (AES) New Instructions (NI) to
ensure data security. The options are Enable and Disable.
Lock PACKAGE_RAPL_LIMIT
Use this feature to lock the MSR 0x610 bit. The options are Disable and Enable.
PL1 Time Window
              
miliseconds. The default setting is 45
PL1 Power Level

The default setting is 25
PL2 Power Level

The default setting is 29
Active Processor Cores
Use this feature to set the number of processor cores that will be activated for each CPU.
Select 0 to activate all processor cores.
Chipset Conguration
Caution: Setting the wrong values in the following sections may cause the system to malfunc-
tion.
North Bridge Conguration
North Bridge Conguration
Memory Information
MRC Version
Total Memory
Memory Frequency
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with
greater reliability, security and availability in networking and data-sharing. The options are
Disabled and Enabled.

Related product manuals