Supermicro SuperServer E200-9A - Page 49

49
Chapter 5: BIOS
Interrupt Remapping
Use this feature to enable Interrupt Remapping support, which detects and controls external
interrupt requests. The options are Disabled and Enabled.
NonVolatile Memory Setup
Method
Use this feature to select how data will be saved after power loss. The options are Dis-
abled and NVDIMM.
*If the feature above is set to NVDIMM, the following items will become available
for conguration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are Disabled and Enabled.
Cache Flushing

MemCtrlr only and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are external and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
The feature is always Disabled.
PMC Reset

SMBus slave power down. The options are Disabled and Enabled.
Power Button Override
-
ton override. The options are Disabled and Enabled.