Supermicro SuperServer E200-9A - Page 50

50
SuperServer E200-9A User's Manual
ME Pwr Button Override

Button Override. The options are Disabled and Enabled.
ME WDT
             
expires. The options are Disabled and Enabled.
ME Reset

reset. The options are Disabled and Enabled.
PMC WDT

expires. The options are Disabled and Enabled.
ME Uncorr Error
-
able ME error. The options are Disabled and Enabled.
SYS_PWROK

informs the PCH that power to system components is stable. The options are Disabled
and Enabled.
PMC Parity Error

Disabled and Enabled.
Return Power
Set this feature to Enabled for the system to power up within four seconds after an
ADR entry. The options are Disabled and Enabled.
Interleaving
Set this feature to Enabled for NVDIMM interleaving support. Interleaving is a technique
that increases memory speed. The options are Disabled and Enabled.