58
SuperServer E302-9A User's Manual
NonVolatile Memory Setup
Method
Use this feature to select how data will be saved after power loss. The options are Dis-
abled and NVDIMM.
*If the feature above is set to NVDIMM, the following items will become available
for conguration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are Disabled and Enabled.
Cache Flushing
MemCtrlr only and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are external and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
The feature is always Disabled.
PMC Reset
SMBus slave power down. The options are Disabled and Enabled.
Power Button Override
-
ton override. The options are Disabled and Enabled.
ME Pwr Button Override
Button Override. The options are Disabled and Enabled.
ME WDT
expires. The options are Disabled and Enabled.
To Next Page
Loading...