59
Chapter 6: UEFI BIOS
ME Reset
reset. The options are Disabled and Enabled.
PMC WDT
expires. The options are Disabled and Enabled.
ME Uncorr Error
-
able ME error. The options are Disabled and Enabled.
SYS_PWROK
informs the PCH that power to system components is stable. The options are Disabled
and Enabled.
PMC Parity Error
Disabled and Enabled.
Return Power
Set this feature to Enabled for the system to power up within four seconds after an
ADR entry. The options are Disabled and Enabled.
Interleaving
Set this feature to Enabled for NVDIMM interleaving support. Interleaving is a technique
that increases memory speed. The options are Disabled and Enabled.
Restore
When this feature is set to Enabled, data is restored to NVDIMM after a system power-
up. The options are Disable and Enabled.
Erase & ARM
Select Enabled to enable erasing and arming of NVDIMM after data recovery. The op-
tions are Disabled and Enabled.
To Next Page
Loading...