15
Chapter 1: Introduction
Connector Description
JSTBY1 Standby Power Connector
JTAG_HFI1 HFI Debug Port for Fabric CPU
JTBT1 General Purpose Header for Thunderbolt Add-on Card
JTPM1 Trusted Platform Module/Port 80 connector
JUIDB1
LAN1/2 LAN Ports
M.2 CONNECTOR
PCI-E M.2 Connector, small form factor devices and other portable devices for High speed NVMe
SSDs
S-SATA4/S-SATA5 SATA 3.0 Ports with Power-pin Built-in w/support of SuperDOM (Device-On Module)
S-SGPIO Serial Link General Purpose I/O Header
SP1 Internal Speaker/Buzzer
USB 0/1 Back Panel USB 2.0 Ports
USB 2/3 Front Access USB 2.0 Header
USB 4/5 Back Panel USB 3.0 Ports
USB 6/7 Front Access USB 3.0 Header
USB 8 USB 3.0 Type A Header
VGA VGA Port (Back Panel)
LED Description Status
LED2
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
LEDPWR Onboard Power LED Solid Green: Power On
To Next Page
Loading...
