Supermicro SuperWorkstation 7049GP-TRT - Page 45

45
Chapter 4: Motherboard Connections
VRM_I2C Jumper



VRM_I2C
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 VRM Program
10Gb LAN1/2 Enable/Disable
JPTG1 allows you to enable or disable the 10Gb LAN1/2. The default setting is Enabled.
10Gb LAN Enable/Disable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled
Pins 2-3 Disabled