2-12
X10SLM+/X10SLL+ Motherboard Series User's Manual
Removing Memory Modules
Reverse the steps above to remove the DIMM modules from the motherboard.
Memory Support
The X10SLM+/X10-SLL+ motherboard series supports up to 32GB of Unbuffered
(UDIMM) ECC DDR3 1600/1333 MHz DIMMs in 4 memory slots. Populating these
DIMM modules with a pair of memory modules of the same type and same size
will result in interleaved memory, which will improve memory performance. Please
refer to the table below:
Memory Population Guidelines
Please follow the table below when populating the motherboard.
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Slots per
Channel
DIMMs Populat-
ed per Channel
DIMM Type POR Speeds Ranks per DIMM (any
combination)
2 1 Unbuffered
DDR3
1333, 1600 Single Rank, Dual Rank
2 2 Unbuffered
DDR3
1333, 1600 Single Rank, Dual Rank
Notes:
• Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM
is used. The reduction in memory availability is disproportional. See the
following table for details.
DIMMB2
DIMMA2
DIMMB1
DIMMA1
Towards the CPU
To Next Page
Loading...