Supermicro X10SRH-CF/CLN4F User Manual

Appendix D: Dual Boot Block
D-7
D-2 IPMI Command Sets
To perform perform the Dual Boot Block through the IPMI Command Sets, follow
the instructions below:
1. After the IPMI GUI browser log-in, click on the Remote Control tab, then
Console Redirection, then the Launch Console button to open Java iKVM
Viewer.
2. Open a DOS command prompt for SMCIIPMITool execution. Type ipmi
power down to power off the defective system.

Supermicro X10SRH-CF/CLN4F Specifications

General

Brand	Supermicro
Model	X10SRH-CF/CLN4F
Category	Motherboard
Language	English