Appendix D: Dual Boot Block
D-9
5. Power on the remote system for BIOS recovery ash.
• To power on, type: ipmi power up
After the system powers on, the secondary boot block initializes the essential
hardware components and locates Super.ROM in the USB ash drive, which are
the same as Steps 7-9 in Section D-1.
User Approach
Dual Boot Block is not designed for an automatic operation, non user-attended op-
eration. The feature offers an immediate resilience after a BIOS upgrade somehow
stops upon ashing the on-duty boot block. For a BIOS upgrade on multi-node, SUM
is recommended. Please contact your Field Application Engineer representative for
an understanding of the SUM product.
To Next Page
Loading...
Need help?
General
