Supermicro X10SRH-CF/CLN4F - Page 16

1-8
X10SRH-CF/CLN4F User’s Manual
Network Intel
®
i350 Gigabit Dual-Channel Ethernet controller for
LAN1/LAN2 ports (X10SRH-CF)
Intel
®
i350 Gigabit Quad-Channel Ethernet controller for
LAN1/LAN2/LAN3/LAN4 ports (X10SRH-CLN4F)
BIOS 128 Mb AMI BIOS
®
SPI Flash BIOS
Plug and Play (PnP), DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0,
USB Keyboard and SMBIOS 2.5
Power Conguration ACPI/APM Power Management
Main Switch Override Mechanism
Keyboard Wake-up from Soft-Off
Power-on mode for AC power recovery
PC Health Monitoring CPU Monitoring
Onboard voltage monitors for CPU core, +3.3V, +5V,+12V,
+3.3V Stdby, VBAT, Memory
CPU 5-phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
Thermal Monitor 2 (TM2) support
Fan Control
Fan status monitoring with rmware 4-pin fan speed con-
trol via IPMI interface
Low noise fan speed control
System Management PECI (Platform Environment Conguration Interface) 2.0
support
UID (Unit Identier)/Remote UID
System resource alert via SuperDoctor
®
5
SuperDoctor
®
5, Watch Dog, NMI
Chassis Intrusion header and detection
BIOS ash upgrade utility
Dimensions ATX form factor: 9.6" x 12" (243.84mm x 304.8mm)
Note: It is strongly recommended that you change BMC log-in informa-
tion upon initial system power-on. The manufacture default username is
ADMIN and the password is ADMIN. For proper BMC conguration, please
refer to http://www.supermicro.com/products/nfo/les/IPMI/Best_Prac-
tices_BMC_Security.pdf.