To Next Page

To Previous Page

Chapter 4: AMI BIOS

4-11

Package Clamping Limit1

Use this item to set the limit on power performance states for the runtime proces-

sor, with P0 being the state with the highest frequency (clock speed) and power

(consumption), and P1, a step lower in performance than P0, with its frequency

and voltage scaled back a notch. The options are Between P1/P0 and Below P1.

Short Duration Power Limit Enable

Select Enable to support Short Duration Power Limit (Power Limit 2). The options

are Enable and Disable.

Short Duration Power Limit

This item displays the time period during which short duration power is main-

tained. The default setting is 0.

Package Clamping Limit2

Use this item to set the limit on power performance states for the processor

operating in turbo mode, with P0 being the state with the highest frequency

(clock speed) and power (consumption), and P1, a step lower in performance

than P0, with its frequency and voltage scaled back a notch. The options are

Between P1/P0 and Below P1.

Chipset Conguration

Warning! Please set the correct settings for the items below. A wrong conguration

setting may cause the system to become malfunction.

North Bridge

This feature allows the user to congure the settings for the Intel North Bridge.

IIO Conguration

EV DFX (Device Function On-Hide) Feature

When this feature is set to Enable, the EV_DFX Lock Bits that are located on a

processor will always remain clear during electric tuning. The options are Dis-

able and Enable.

IIO1 Conguration/IIO2 Conguration

IOU2 (II0 PCIe Port 1)

This item congures the PCI-E port Bifuraction setting for a PCI-E port specied

by the user. The options are x4x4, X8, and Auto.

Supermicro X10SRH-CF/CLN4F User Manual

Questions and Answers: