Supermicro X11DPU - Motherboard Features

Note: The table above is continued on the next page.
14
Super X11DPU User's Manual
Motherboard Features
CPU
• Dual Intel® Xeon® scalable processors (in Socket P); Dual Intel® Xeon® processor with Intel® Omni-Path Fabric
Note 1: The Intel® Xeon® Processor Scalable Family includes Intel® Xeon® Platinum 8100 processor, Intel® Xeon®
Gold 6100/5100 processor, Intel® Xeon® Silver 4100 processor, and Intel® Xeon® Bronze 3100 processor.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Memory
• Integrated memory controller supports up to 768 GB or 1.5 TB of Load Reduced DIMM (LRDIMM), Registered DIMM
(RDIMM), DDR4 (288-pin) ECC 2666/2400/2133 MT/s modules in 24 slots
Note: The memory capacity support will differ according to the SKUs.
DIMM Size
• Up to 128 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel® C621
Expansion Slots
• One (1) PCI Express 3.0 (x16 + x16) slot supported by CPU2 for left riser card use (SXB1A/SXB1B/SXB1C)
• One (1) Express 3.0 x8 in x16 slot supported by CPU2 (SXB2) for center right hand riser card use
• One (1) PCI Express 3.0 (x16 + x16 + x8) slot supported by CPU1 for far_right ultra riser card (used for SAS3 AOM
expansion and LAN options via ultra riser) (SXB3A/SXB3B/SXB3C)
Non Volatile Memory Express (NVMe) Slots
• Four (4) NVMe PCI-E slots (P1-NVMe1/P1-NVMe2 supported by CPU1 & P2-NVMe1/P2-NVMe2 supported by CPU2)
• RAID 0/1/5/10 using Intel® VROC (option RAID key)
BaseBoard Management Controller (BMC)
• ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
• One (1) IPMI_dedicated_LAN located on the rear IO backpanel
Graphics
• Graphics controller via AST 2500 BMC
Motherboard Features