Supermicro X11DPU - Page 43

43
Chapter 2: Installation
2
X11DPU
DESIGNED IN USA
BAR CODE
IPMI CODE
CPU2
CPU1
BIOS
LICENSE
FAIL
LED UID NIC
2 1
NIC
LED HDD PWR
LED
X NMI
PWR
ON
JF1
RST
PS
CPU2_PORT3A
CPU2_PORT2C CPU2_PORT2A
CPU2_PORT1A
PCH_PORT1 CPU2_DMI
CPU1_PORT1A
CPU1_PORT3A
CPU1_PORT3C CPU1_PORT2A
CPU1_PORT2C
CPU2_PORT3C
REV:1.10
1
2
Front Panel USB 3.0
Header Pin Denitions
Pin# Denition Pin# Denition
1 +5V 2 +5V
3 USB_PN2 4 USB_PN3
5 USB_PP2 6 USB_PP3
7 Ground 8 Ground
9 Key 10 Ground
Back Panel USB (3.0)
Pin Denitions
Pin# Denition Pin# Denition
1 VBUS 10 Power
2 D- 11 USB 2.0 Differential Pair
3 D+ 12
4 Ground 13 Ground of PWR Return
5 StdA_SSRX- 14 SuperSpeed Receiver
6 StdA_SSRX+ 15 Differential Pair
7 GND_DRAIN 16 Ground for Signal Return
8 StdA_SSTX- 17 SuperSpeed Transmitter
9 StdA_SSTX+ 18 Differential Pair
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB0/1) located on the I/O back panel. The motherboard also
has a front access USB 3.0 header that supports two USB connections (USB3/4). A USB
Type A header (USB2), located next to GPU PWR2, provides also USB 3.0 support. The
onboard headers can be used to provide front side USB access with a cable (not included).
1. USB0 (3.0)
2. USB1 (3.0)
3. USB3/4 (USB 3.0)
4. Type A USB2 (USB 3.0)
4
3
1