Supermicro X11SSH-GF-1585 - Quick Reference Table; Jumper Description

12
X11SSH-GF/-GTF (-1585/-1585L) User's Manual
Quick Reference Table
Jumper Description Default Setting
JBR1 BIOS Recovery Pins 1-2 (Normal)
JBT1 CMOS Clear Open (Normal)
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Enable/Disable Pins 2-3 (Disabled)
JLED1 Power LED Enable/Disable Pins 1-2 (Enabled)
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN1/2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JVRM1 VRM SMB Clock (to BMC or PCH) Pins 1-2 (BMC, Normal)
JVRM2 VRM SMB Data (to BMC or PCH) Pins 1-2 (BMC, Normal)
JWD1 Watch Dog Timer Pins 1-2 (Reset)
LED Description Status
LED1 Unit Identier LED Blue: Unit Identied
LED2 Power LED Solid Green: Power On
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
Connector Description
BAT1 Onboard CMOS Battery
COM1/COM2 Serial COM Ports
FAN1 ~ FAN4, FANA System/CPU Fan Headers (FAN1: CPU Fan)
IPMI_LAN Dedicated IPMI LAN Port
I-SATA2 ~ I-SATA7 Intel® PCH SATA 3.0 Ports
I-SGPIO1/I-SGPIO2 Serial Link General Purpose I/O Headers
JD1 Power LED/Speaker Header (Pins 1-3: Power LED, Pins 1-4: Speaker)
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JPI
2
C1 Power Supply SMBus I
2
C Header
JPWR1 24-pin ATX Power Connector
JPWR2 4-pin CPU Power Connector
JSD1/JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 Unit Identier Switch
JVR1 SMB Programmable Header (for debugging only)
LAN1 ~ LAN2 LAN (RJ45) Ports
M.2 M.2 Slot
SLOT4 PCI-Express 3.0 X4 (IN X8) Slot supported by Intel® PCH