Supermicro X11SSH-GF-1585 - Pci Express Configuration

X11SSH-GF/-GTF (-1585/-1585L) User's Manual
76
REFRESH_2X_MODE
Use this feature to select the refresh mode. The options are Disabled, 1-Enabled for WARM
or HOT, and 2-Enabled HOT only.
Closed Loop Thermal Throttling Management
Select Enabled to support Closed-Loop Thermal Throttling which will improve reliability and
reduces CPU power consumption via automatic voltage control while the CPU are in idle
states. The options are Disabled and Enabled.
GT - Power Management Control
The following GT - Power Management Control information will be displayed:
• GT Info
RC6 (Render Standby)
Select Enabled to enable render standby support. The options are Disabled and Enabled.
PCH-IO Conguration
The following PCH-IO information will be displayed:
• Intel PCH RC Version
• Intel PCH SKU Name
• Intel PCH Rev ID
PCI Express Conguration
PCH DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and Enabled.
Peer Memory Write Enable
Use this feature to enable or disable peer memory write. The options are Disabled or
Enabled.
PCH SLOT4 PCI-E 3.0 X4 (IN X8)
SLOT4 ASPM
Use this item to set the Active State Power Management (ASPM) level for the PCI-E device
installed on the slot specied. Select Auto for the system BIOS to automatically set the