Supermicro X11SSH-GF-1585 - Intel Server Platform Services

X11SSH-GF/-GTF (-1585/-1585L) User's Manual
82
Serial Port 2 Change Settings
This feature species the base I/O port address and the Interrupt Request address of a
serial port specied by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port 2 Attribute
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are SOL and COM.
Intel Server Platform Services
Intel Server Platform Services Conguration
The following items will display as detected by the BIOS:
• ME BIOS Interface Version
• SPS Version
• ME FW (Firmware) Status Value
• ME FW (Firmware) State
• ME FW (Firmware) Operation State
• ME FW (Firmware) Error Code
• ME NM FW (Firmware) Status Value
• BIOS Booting Mode
• Cores Disabled
• ME FW (Firmware) SKU Information
• End-of POST Status