X11SSH-GF/-GTF (-1585/-1585L) User's Manual
78
PCIe PLL SSC
Select Enabled to enable Phase Locked Loop (PLL) support on the Spread Spectrum Clock
(SSC) settings to help reduce Electromagnetic Interference caused by the components in
the system. Select Disabled to enhance system stability. The options are Disabled and
Enabled
SATA Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel® PCH chip and displays the following items:
SATA Controller(s)
This item enables or disables the onboard SATA controller supported by the Intel® PCH chip.
The options are Enabled and Disabled.
SATA Mode Selection
Use this item to select the mode for the installed SATA drives. The options are AHCI and RAID.
SATA Frozen
Use this item to enable the HDD Security Frozen Mode. The options are Disabled and
Enabled.
Aggressive LPM Support
When this item is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods
of I/O inactivity, and will return the link to an active state when an I/O activity resumes. The
options are Enabled and Disabled.
Serial ATA Port 0 ~ Port 7
This item displays the information detected on the installed SATA drive on the particular
SATA port.
• Model number of drive and capacity
• Software Preserve Support
Port 0 ~ Port 7 Hot Plug
This feature designates the SATA port specied for hot plugging. Set this item to Enabled
for hot-plugging support, which will allow the user to replace a SATA disk drive without
shutting down the system. The options are Disabled and Enabled.
To Next Page
Loading...
