Supermicro X11SSH-GF-1585 - Bmc Network Configuration

Chapter 4: BIOS
91
BMC Network Conguration
The following items will be displayed:
• IPMI LAN Selection
• IPMI Network Link Status
Update IPMI LAN Conguration
Select Yes for the system BIOS to automatically reset the following IPMI settings upon next
system boot. The options are No and Yes.
Conguration Address Source (Available when the item above - Update IPMI LAN
Conguration is set to Yes)
Use this item to select the IP address source for this computer. If Static is selected, you will
need to know the IP address of this computer and enter it to the system manually in the eld.
If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Conguration Protocol)
server attached to the network and request the next available IP address for this computer.
The options are DHCP and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number is separated by dots and it should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are 6 two-digit
hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 172.31.0.1).
VLAN
Use this item to enable or disable the IPMI VLAN function. The default setting is Disable.