Supermicro X11SSH-GF-1585 - 2.3 Memory Support and Installation

25
Chapter 2: Installation
2.3 Memory Support and Installation
Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to pre-
vent any possible damage.
Memory Support
The X11SSH-GF/-GTF (-1585/-1585L) supports up to 64GB of DDR4 ECC SO-DIMM
2400MHz memory. Populating these DIMM slots with a pair of memory modules of the same
type and size will result in interleaved memory, which will improve memory performance.
Note: Be sure to use memory modules of the same type and speed. Mixing of memory
modules of different types and speeds is not allowed.
Towards the edge of the motherboard
Towards the CPU
DIMMA2
DIMMA1
SO-DIMM Module Population Sequence
When installing memory modules, the DIMM slots must be populated in the following order:
DIMMA1, DIMMB1, DIMMA2, and DIMMB2.
DIMMB2
DIMMB1