Supermicro X11SSH-GF-1585 - Page 34

34
X11SSH-GF/-GTF (-1585/-1585L) User's Manual
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be congured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin denitions.
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Power
2 Ground
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin denitions.
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
1. Power Button
2. Reset Button
Reset Button
UID LED
1
NIC1 Activity LED
Power Button
2
HDD LED
Power LED
PW
R
Reset
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
Ground
Ground
Power Supply Fail
X
NIC2 Activity LED
3.3V Stby
19 20
X
X
Ground
NMI
1
2