Supermicro X11SSL-CF User Manual

Appendix E: Dual Boot Block
119
E.2 Steps to Reboot the System by Using Jumper JBR1
1. Power down the system.
2. Close pins 2-3 on jumper JBR1, and power on the system.
3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix D).
4. After completing the steps above, power down the system.
5. Close pins 1-2 on jumper JBR1, and power on the system.

Supermicro X11SSL-CF Specifications

General

Brand	Supermicro
Model	X11SSL-CF
Category	Motherboard
Language	English