EasyManuals Logo

Supermicro X11SSL-CF User Manual

Supermicro X11SSL-CF
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
X11SSL-CF/-nF User Manual
94
COM2 Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial data
communication. Select 2 Stop Bits if slower devices are used. The options are 1 and 2.
COM2 Flow Control
Use this feature to set the ow control for Console Redirection to prevent data loss caused
by buffer overow. Send a "Stop" signal to stop sending data when the receiving buffer is full.
Send a "Start" signal to start sending data when the receiving buffer is empty. The options
are None and Hardware RTS/CTS.
COM2 VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The
options are Disabled and Enabled.
COM2 Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages to
a remote server. The options are Disabled and Enabled.
COM2 Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Disabled and
Enabled.
COM2 Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection for
legacy OS support. The options are 80x24 and 80x25.
COM2 Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal emulator
designed for the Windows OS. The options are VT100, LINUX, XTERMR6, SCO, ESCN, and
VT400.
COM2 Redirection After BIOS POST
Use this feature to enable or disable legacy Console Redirection after BIOS POST. When
set to BootLoader, legacy Console Redirection is disabled before booting the OS. When set
to Always Enable, legacy Console Redirection remains enabled when booting the OS. The
options are Always Enable and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Services
EMS Console Redirection
Select Enabled to use a serial port specied by the user for Console Redirection for Out-Of-
Band/Windows Emergency Services. The options are Disabled and Enabled.
*If the item above set to Enabled, the following items will become available for user's
conguration:

Table of Contents

Other manuals for Supermicro X11SSL-CF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11SSL-CF and is the answer not in the manual?

Supermicro X11SSL-CF Specifications

General IconGeneral
BrandSupermicro
ModelX11SSL-CF
CategoryMotherboard
LanguageEnglish

Related product manuals