4-16
X9DRG-O(T)F-CPU/X9DRG-O-PCIE Platform User’s Manual
an active state when I/O activity resumes. The options are Enabled and
Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plugging support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are Enabled and Disabled.
Port 0~5 Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by spinning-up of multiple devices simultane-
ously. The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA RAID Option ROM/UEFI Driver
Use this feature to enable the onboard SATA Option ROM or EFI driver. The
options are Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plugging support for the particular port which
will allow the user to replace a device without shutting down the system.
The options are Disabled and Enabled.
SCU (Storage Control Unit) Conguration
Storage Controller Unit
Select Enabled to support SCU storage devices. The options are Disabled and
Enabled.
SCU RAID Option ROM/UEFI Driver
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device or from the UEFI driver. The options are Disabled and Enabled.
SCU Port 0-SCU Port 3: The AMI BIOS will automatically detect the onboard SCU
devices and display the status of each SCU device as detected.
To Next Page
Loading...
Need help?
General
