Chapter 4: AMI BIOS
4-25
IPM
The following IPMI information will be displayed:
•IPMI Firmware Revision
•IPMI Status
System Event Log
This feature is used to change the Sytem Event Log (SEL) conguration.
SEL Components - Change this item to enable or disable all features of System
Event Logging. The options are Enabled and Disabled. When this feature is set
to Enabled, the following can be congured:
Erase SEL - This option erases all logged SEL events. The options are No,
Yes, On Next reset and Yes, On Every reset.
When SEL Full
This option automatically clears the System Event Log memory of all messages
when it is full. The options are Do Nothing and Erase Immediately.
To Next Page
Loading...
Need help?
General
