EasyManuals Logo

Supero X10SLM-F User Manual

Supero X10SLM-F
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
4-18
X10SLM-F/X10SLL-F/X10SLL-SF/X10SLL-S User’s Manual
ment) to boot the computer using a PXE device installed in a LAN port specied.
Select Disabled to prevent system boot using a device installed in a LAN port. The
options are Disabled, PXE and iSCSI. The default setting for Onboard LAN1 Op-
tion ROM is PXE. The default setting for Onboard LAN2 Option ROM is Disabled.
VGA Priority
This feature selects the priority between the onboard and rst offboard video device
that has been detected. The options are Onboard and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Ipv4 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv4 PXE boot option will not be supported.
The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv6 PXE boot option will not be supported.
The options are Enabled and Disabled.
ACPI Settings
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support for
the Windows 2008 (or a later vision) operating system. The options are Enabled
and Disabled.
Intel Server Platform Services Conguration
The following status information for this motherboard are displayed:
•ME (Management Engine) BIOS Interface Version

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero X10SLM-F and is the answer not in the manual?

Supero X10SLM-F Specifications

General IconGeneral
BrandSupero
ModelX10SLM-F
CategoryMotherboard
LanguageEnglish

Related product manuals