4-12
X10SLM-F/X10SLL-F/X10SLL-SF/X10SLL-S User’s Manual
PEG1 - Gen X
This item allows the generation conguration of PEG1 on the PCI-E slot. The
options are Auto, Gen1, Gen2 and Gen3.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS will automatically detect a PCI-E device that
is not in compliance. The options are Enabled and Disabled.
Program PCI-E ASPM After OpROM
PCI-E ASPM, Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial-link devices
installed on PCI-Exp slots during prolonged off-peak time. If this item is set to
Enabled, PCI-E ASMP will be programmed after OpROM. If this item is set to
Disabled, the PCI-E ASPM will be programmed before OpROM. The options are
Enabled and Disabled.
PEG0-ASPM/PEG1-ASPM
This feature congures the ASPM (Active State Power Management) settings
for the graphics devices installed on PCI-E Slot 0, Slot 1, or Slot2. The options
are Disabled, Auto, ASPM L0s, ASPM L1s, and ASPM L0sL1.
Memory Conguration
This item displays the information on the memory modules installed on the
motherboard.
•Memory RC Version
•Memory Frequency
•Total Memory
•Memory Voltage
•DIMM A1
•DIMM A2
•DIMM B1
•DIMM B2
•CAS Latency (tCL)
To Next Page
Loading...
Need help?
General
