EasyManuals Logo

Supero X8DT3 User Manual

Default Icon
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
1-10
X8DT3/X8DTi/X8DT3-F/X8DTi-F/X8DT3-LN4F/X8DTi-LN4F User's Manual
1-4 Special Features
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond when
AC power is lost and then restored to the system. You can choose for the system
to remain powered off (in which case you must hit the power switch to turn it back
on) or for it to automatically return to a power- on state. See the Advanced BIOS
Setup section to change this setting. The default setting is Last State.
1-5 PC Health Monitoring
This section describes the PC health monitoring features of the X8DT3/X8DTi/
X8DT3-F/X8DTi-F/X8DT3-LN4F/X8DTi-LN4F. All have an onboard System Hard-
ware Monitor chip that supports PC health monitoring. An onboard voltage monitor
will scan these onboard voltages continuously: CPU1 Vcore/CPU2 Vcore, CPU1
DIMM/CPU2 DIMM, 1.5V, 3.3Vcc (V), 3.3V SB (V), 12Vcc (V), 5Vin, and Battery
Voltage. Once a voltage becomes unstable, a warning is given or an error mes-
sage is sent to the screen. Users can adjust the voltage thresholds to de ne the
sensitivity of the voltage monitor.
Fan Status Monitor with Firmware Control
The PC health monitor can check the RPM status of the cooling fans. The onboard
CPU and chassis fans are controlled by Thermal Management via BIOS (under
Hardware Monitoring in the Advanced Setting).
Environmental Temperature Control
The thermal control sensor monitors the CPU temperature in real time and will turn
on the thermal control fan whenever the CPU temperature exceeds a user-de ned
threshold. The overheat circuitry runs independently from the CPU. Once it detects
that the CPU temperature is too high, it will automatically turn on the thermal fan
control to prevent any overheat damage to the CPU. The onboard chassis thermal
circuitry can monitor the overall system temperature and alert users when the chas-
sis temperature is too high.
To avoid possible system overheating, please be sure to provide adequate
air ow to your system.
System Resource Alert
This feature is available when used with Supero Doctor III in the Windows OS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero X8DT3 and is the answer not in the manual?

Supero X8DT3 Specifications

General IconGeneral
BrandSupero
ModelX8DT3
CategoryMotherboard
LanguageEnglish

Related product manuals