4-6
X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
RTC Alarm Time (Available if Resume on RTC Alarm is Enabled)
Set the time when the system wakes up during the day specifi ed under the RTC
Alarm Date above.
Processor and Clock Options
This submenu displays the status of the processor used in the motherboard and
allows the user to confi gure the Processor and Clock settings.
Type of the CPU
• : This item displays the CPU type for the motherboard.
Frequency
• : This item displays the CPU frequency for the motherboard.
CPUID
• : This item displays the CPUID for the motherboard.
Microcode Revision
• : This item displays the CPUID for the motherboard.
Cache L1
• : This item displays the size of Cache L1 of the CPU for the moth-
erboard.
Cache L2
• : This item displays the size of Cache L2 of the CPU for the moth-
erboard.
Cache L3
• : This item displays the size of Cache L3 of the CPU for the moth-
erboard.
Ratio Status
• : This item displays the status of the CPU ratio.
Ratio Actual Value
• : This item displays the actual value of the CPU ratio.
CPU Ratio
If set to Manual, this option allows the user to manually set the ratio between the
CPU Core Clock and the FSB Frequency. (Note: if an invalid ratio is entered, the
AMI BIOS will restore the setting to the previous state.) The options are Auto and
Manual.
Clock Spread Spectrum
Select Enable to enable Clock Spectrum support, which will allow the BIOS to moni-
tor and attempt to reduce the level of Electromagnetic Interference caused by the
components whenever needed. The options are Disabled and Enabled.
To Next Page
Loading...
Need help?
General
