Chapter 4: AMI BIOS
4-25
Change Supervisor Password
Select this feature, press <Enter> to access the submenu, and enter a new Su-
pervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Select Full Access to grant the user full access to the Setup utility, and change
Setup settings. Select View Only to grant the user access to the Setup utility and
view the settings without making changes. Select Limited to allow the user to change
selected settings such as Date and Time. Select No Access to prevent the user
from accessing the Setup utility.
Change User Password
Select this feature, press <Enter> to access the submenu, and enter a new user
Password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.
Boot Sector Virus Protection
If this feature is enabled, the AMI BIOS displays a warning message when any
program (or virus) issues a Disk Format command or attempts to write to the boot
sector of the hard disk drive. The options are Enabled and Disabled.
4-5 Boot Confi guration
Use this feature to confi gure boot settings.
To Next Page
Loading...
Need help?
General
