4-12
X9SCM-IIF/X9SCL-IIF Series User's Manual
Serial Port Console Redirection Conguration
COM0/COM1/SOL Console Redirection
Use this feature to enable console redirection for COM0 and COM1 ports. The
options are Enabled and Disabled. The default for COM0 and COM1 is Disabled.
The default for SOL is Enabled.
Console Redirection Settings
Congure the following options for the Console Redirection Settings. The most
common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 38400, 57600, or 115200
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Flow Control: None or Hardware RTS/CTS
VT-UTF8 Combo Key Support: Enabled or Disabled
Recorder Mode: Disabled or Enabled
Resolution 100x31: Disabled or Enabled
Legacy OS Redirection Resolution: 80x24 or 80x25
Serial Port for Out-of-Band Management / Windows Emergency
Management Services (EMS) Console Redirection
Use this feature to enable console redirection. The options are Enabled and Dis-
abled. The default is Disabled.
Console Redirection Settings
Congure the following options for the Console Redirection Settings. The most
common settings are set as default:
Out-of-Band Mgmt Port: COM0, COM1, SOL
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 57600, or 115200
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
To Next Page
Loading...
Need help?
General
