4-18
X9SCM-IIF/X9SCL-IIF Series User's Manual
Setup Prompt Timeout
Use this feature to specify the amount of time (in seconds) to wait for the setup
activation key. The default setting is 1.
Retry Boot Devices
This feature forces the BIOS to continually try to boot from the installed legacy
devices. The options are Disabled and Enabled.
Boot Option Filter
This option controls what devices the system can boot from. The options are UEFI
and Legacy, Legacy Only, and UEFI Only.
Boot Option Priorities
This feature allows the user to specify which devices are boot devices and the order
of priority from which the systems boots during startup.
Boot Option #1/ Boot Option #2/etc
Use this feature to specify the sequence of boot device priority.
Network Device BBS Priorities, Hard Drive BBS Priorities
This option sets the order of the legacy network devices and Hard Disks detected
by the motherboard.
4-6 Boot Settings
To Next Page
Loading...
Need help?
General
